Salter Brecknell 7820-100 Capacity-100 lb x 0.02 lb (50 kg x 0.01 kg*) * Metric weighing can be configured in the field during calibration. Dimensions- 12.5" L x 14" W x 4" H 318 mm (L) x 358 mm (W) x 104 mm (H) Certifications- United States: NTEP #95-070 Canada: MOI #AM-5076 Rev 2 For use as a Class III device from +5° C to 40° C
This Salter Brecknell 7820-100 NTEP approved scale fits into any operation as a stand-alone scale, interfaced to a shipping manifest software, or receiving station.
Specifications:
- Display Controls- ZERO: Includes Auto Zero Tracking or Manual push button to re-establish zero reference. TEST: Runs a diagnostic test to ensure scales is fully functional, and allows a real-time view of internal settings.
- Construction- Stainless steel weight platter, die cast aluminum base
- Field Calibration- Alternate span points can simplify field calibration by using less than full capacity weights. Can be set-up as either decimal pound or kilogram.
- RS-232 Cable- Included with each scale, DB 9-pin, null modem, female connector allows you to connect to a PC
- Emulation Protocols- Standard NCI default with field configurable settings of 8213, 3835, SMA, and Auto Weight Send. This allows you to select compatible scale communication settings or scale drivers during field installation when interfacing with shipping software programs or host devices.
- Internal Display- 1/2" high, 6 digit LCD
- Capacity-100 lb x 0.02 lb (50 kg x 0.01 kg*) * Metric weighing can be configured in the field during calibration.
- Dimensions- 12.5" L x 14" W x 4" H 318 mm (L) x 358 mm (W) x 104 mm (H)
- Power- 120 VAC (+10% -15%), 60 Hz, standard 3-wire ground
- Operating Environment-Temperature: 42° F to 104° F (5° C to 40° C) Relative Humidity: 10 to 95% (non-condensing)
- Input/Output- RS-232, bi-directional, configurable 1200- 19.2K baud. Transmits weight and scale status whenever ASCII "W" <CR> is sent by a remote device
- Internal Resolution- 1 part in 120,000
- Certifications- United States: NTEP #95-070 Canada: MOI #AM-5076 Rev 2 For use as a Class III device from +5° C to 40° C
|
Enlarge Image
| |
|
|
| |
|
|
 |
Qualifies for Free Shipping |
 |
Drop Shipped from Manufacturer |
 |
Covered Under Manufacturer Warranty |
 |
Product Manual |
|
Spec Sheet |
|
|
|
| |
|
|
|
Home
Wholesale
Customer Service
RSS
